- Joined
- Mar 12, 2017
- Messages
- 20,183
- Reaction score
- 3,232
Hi
I have to mount two new overhauled Bendix mags and staggered timing. Have not done it in a while
Left mag 28 degrees and right mag 26
I also will set the red mark after rotating the impulse coupler and backing up to st the red mark in the window
I want to confirm my procedure. Could some one post it...........I have the T-pot for finding TDC
Much appreciate it
BTW not sure what cylinders are on the engine? If it is the older continental ones do I set timing at 24 degrees.......?
Mag nuts torque 200 inch pounds ……16 foot pounds..
Static RPM 2350-2125 standard temperature
Rich
I have to mount two new overhauled Bendix mags and staggered timing. Have not done it in a while
Left mag 28 degrees and right mag 26
I also will set the red mark after rotating the impulse coupler and backing up to st the red mark in the window
I want to confirm my procedure. Could some one post it...........I have the T-pot for finding TDC
Much appreciate it
BTW not sure what cylinders are on the engine? If it is the older continental ones do I set timing at 24 degrees.......?
Mag nuts torque 200 inch pounds ……16 foot pounds..
Static RPM 2350-2125 standard temperature
Rich
Last edited:
