- Joined
- Feb 15, 2012
- Messages
- 9,608
- Reaction score
- 4,449
Well, we're at it again. This should be it.
The top pilot's side quarter panel was removed to cut holes and add legends as required.
Adding in an altitude preset device (APS4a), got the idea from RNC. It is very slick, works with the ASPEN altitude preset, so you don't need to set an altimeter separately in the unit. Uses a fancy Eaton plug as an annunciator and arming button.
Also adding in LEMO plugs.
Will be all LED now -- adding in the AVEO wingtip and tail combo position/flasher units. Also adding a red belly beacon.
The position lights and belly beacon will be wired to turn on with the Master, will be adding a guarded disable switch for both.
Finally adding a Fuel Pump annunciation light and an EDM830 warning light.
Sadly, the AVEO lights are stuck in Customs, now delayed almost two weeks - rather odd. Will have to return to get those swapped out.
* Orest
The top pilot's side quarter panel was removed to cut holes and add legends as required.
Adding in an altitude preset device (APS4a), got the idea from RNC. It is very slick, works with the ASPEN altitude preset, so you don't need to set an altimeter separately in the unit. Uses a fancy Eaton plug as an annunciator and arming button.
Also adding in LEMO plugs.
Will be all LED now -- adding in the AVEO wingtip and tail combo position/flasher units. Also adding a red belly beacon.
The position lights and belly beacon will be wired to turn on with the Master, will be adding a guarded disable switch for both.
Finally adding a Fuel Pump annunciation light and an EDM830 warning light.
Sadly, the AVEO lights are stuck in Customs, now delayed almost two weeks - rather odd. Will have to return to get those swapped out.
* Orest
Last edited:
