• Become a Subscribing Member today!

    PiperForum.com is a vibrant community of Piper owners and pilots with over 1,500+ active members.

    Access to PiperForum.com is subscription based. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched library of Piper knowledge.

    Why become a Subscribing Member?

    • Swap technical knowledge, plan meetups and sell planes/parts.
    • We host technical knowledge of general aviation topics and specific topics on J3-Cubs, Cherokees, Comanches, Pacers and more.
    • In addition to an instant community of pilots for you, PiperForum.com is a library of technical topics, airplane builds, images, technical manuals, technical documents and more.

    Become a Subscribing Member and access PiperForum.com in full!

    Subscribe Now

Sandel 3308 VNAV indicator

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 10, 2015
Messages
347
Reaction score
104
I’ve been flying behind the Sandel for three years and I’ve never been able to get a VNAV needle to display on RNAV approaches. It pops up for ILS and functions normally but on an LPV or L/VNAV approach I have to use the path needle on the OBS. I recently had an avionics shop confirm the install was correct. My GPS is a 430W. “LPV” is indicated and between the 2 instruments I have track and path so I feel the 430W is putting out the correct signal. Does anyone with the same install have the same problem?
Thoughts appreciated. Thanks.

Geoff
 

Latest posts

Back
Top