The PMA6000b wiring shows Com1 Audio Hi on pin 6 and Com1 low on pin 20
On the KX170b pin 34 show Com 500 ohm out.
I assume that pin 34 is tied to pin 6.
What about pin 20 is not used or sent to ground?
Can someone verify this.
I uploaded the wiring for both
View attachment wiring PMA6000B_IM.pdf
View attachment Extracted pages from KX175B_IM.pdf
On the KX170b pin 34 show Com 500 ohm out.
I assume that pin 34 is tied to pin 6.
What about pin 20 is not used or sent to ground?
Can someone verify this.
I uploaded the wiring for both
View attachment wiring PMA6000B_IM.pdf
View attachment Extracted pages from KX175B_IM.pdf
