- Joined
- Feb 15, 2018
- Messages
- 402
- Reaction score
- 241
Some of you may remember me as the guy who is building a 30% scale RC model of a Cherokee 180. I'm having a small dilemma and hope someone here can help.
Basically I need the diameter of the mounted/inflated tire and any dimensions of the wheel itself you might have. The width through the widest part of the sidewall would be helpful too but not necessary.
All I've been able to research is the tire size of 6.00x6. Certainly helpful but not enough for this project. And at present, I don't have access to a full scale Cherokee.
So any help is appreciated but please, don't go to the trouble of dismounting a wheel just to help me!
Thanks all!
Basically I need the diameter of the mounted/inflated tire and any dimensions of the wheel itself you might have. The width through the widest part of the sidewall would be helpful too but not necessary.
All I've been able to research is the tire size of 6.00x6. Certainly helpful but not enough for this project. And at present, I don't have access to a full scale Cherokee.
So any help is appreciated but please, don't go to the trouble of dismounting a wheel just to help me!
Thanks all!
